Actions

Mega Drive Portable Video Game Player

From Sonic Retro

Revision as of 20:27, 5 August 2008 by Overlord (talk | contribs) (→‎Games on the UK release: Hadn;t seen Spinball, either)
File:Pmd step 00.jpg
The UK release of the Atgames Portable Unit.

Overview

This portable megadrive unit, designed by Digital Media Cartridge Ltd, is a portable mega drive, which uses a "Megadrive on a chip" to run various built in games.

Games on the Hong Kong release

  • Alex Kidd and the Enchanted Castle
  • Alien Storm
  • Altered Beast
  • Arrow Flash
  • Columns III
  • Crack Down
  • Decap Attack
  • Dr. Robotnik's Mean Bean Machine
  • E-Swat: City Under Scope
  • Ecco the Dolphin
  • Ecco Jr.
  • Flicky
  • Gain Ground
  • Golden Axe
  • Jewel Master
  • Kid Chameleon
  • Ristar
  • Shadow Dancer
  • Sonic & Knuckles
  • The Revenge of Shinobi II

Games on the UK release

  • Alex Kidd and the Enchanted Castle
  • Alien Storm
  • Altered Beast
  • Arrow Flash
  • Columns III
  • Crack Down
  • Decapattack
  • Dr. Robotnik's Mean Bean Machine
  • E-Swat: City Under Scope
  • Ecco the Dolphin
  • Ecco Jr.
  • Shinobi III
  • Flicky
  • Gain Ground
  • Golden Axe
  • Jewel Master
  • Kidd Chameleon
  • Sonic Spinball
  • Shadow Dancer: The Secret of Shinobi
  • Sonic & Knuckles

The most notable difference is the lack of Ristar in the UK release.

Disassembly Guide

Qjimbo put together this short guide on how to take the device apart, to get a look at the components inside.

  • Th pmd step 01.jpg

    Step 1: Remove the batteries and every screw on the back. 5 screws in total, the battery panel screw and a screw on each corner.

  • Th pmd step 02.jpg

    Step 2: Prize open the the case. I found that around the volume control is a good place.

  • Th pmd step 03.jpg

    Step 3: Work your way around the edges. There are 2 clips on each side.

  • Th pmd step 04.jpg

    Step 4: Once you have undone all the clips, pull apart the case. The area around the battery compatment is stuck with sticky pads, but it is fairly easy to still pull it apart.

  • Th pmd step 05.jpg

    Step 5: Remove the 2 small screws each side of the main circuit board. There are actually 4 screw holes so some people may have 4 screws to remove.

  • Th pmd step 06.jpg

    Step 6: This part is fiddly, but carefully pull the circuit board out of the case. Again, around the volume control seems a good place.

  • Th pmd step 07.jpg

    Step 7: You're done!

Inside there are two chips. The large one with a seperate PCB is the ROM chip, and the one under the black blob is the CPU. Research into whether a custom ROM could somehow be run on this device is still taking place. Template:MegaDrive

Retrieved from "https://info.sonicretro.org/index.php?title=Mega_Drive_Portable_Video_Game_Player&oldid=75362"